Answers are grounded in this paper and cite their sources.
Several Al/SiC MMCs having several volume fractions up to 15 vol.% and different SiC particulates average sizes, typically, 11, 6 and 3 μm were fabricated using conventional powder metallurgy (PM) route. The effect of the size and volume fraction of SiC particulates on the microstructural and corrosion behavior of Al/SiC metal matrix composites (MMCs) were studied. The results revealed that the Al/SiC MMCs exhibited higher density than pure Al matrix. The static immersion corrosion tests of Al/SiC MMCs in 3.5 wt.% NaCl aqueous solution at several temperatures showed that, at ambient temperature, the Al/SiC MMCs have better corrosion resistance than the pure Al matrix. Reducing the SiC particles size and/or increasing the volume fraction of the SiC particulates reduce(s) the corrosion rate of the Al/SiC MMCs. In contrast, the Al/SiC composites exhibited higher corrosion rates at 50 °C and 75 °C than the pure Al matrix.
No takes yet. Share an insight, caveat, or question.
H.M. Zakaria (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: