This is the authors' abstract. We don't add key points for this paper.
A compact all-fiber sub-nanosecond narrow-linewidth Yb-doped fiber amplifier with a controllable repetition rate has been investigated. Tunable temporal pulses ranging from sub-nanoseconds to 10 ns with repetition rates from 10 kHz to 1 MHz are obtained by controlling the waveform of the injected electrical-pulse signal. Due to the practical requirements of our intended applications, a distributed feedback semiconductor laser with a wavelength of 1064 nm, pulse duration of 802 ps, repetition rate of 500 kHz and average power of 20 mu W is used to seed a dual-stage single mode Yb-doped fiber amplifier. The characteristics of the amplified pulses are measured and exhibit a temporal duration of 810 ps with an average power of 31.2 mW. The gain of the amplified pulse is about 32 dB at the maximum output power. A notable feature of the amplifier pulses is that the spectral linewidth can be maintained to less than 0.1 nm during the dual-stage amplifier process. The noise level lies more than 22 dB below the peak value of the amplified spectrum, which represents an excellent signal-to-noise ratio.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Niu et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: