Answers are grounded in this paper and cite their sources.
The adsorption of POME using natural clay, montmorillonite, has been investigated. The reductions of three important parameters (chemical oxygen demand, total suspended solids and colour) in various influencing factors have been determined. The optimum conditions for mixing speed of the stirrer, contact time, dosage of adsorbent, concentration of palm oil mill effluent (POME) and pH were 300 rpm, 90 min, 5 g/L, 25% POME and pH 7, respectively. The removal reached more than 95% for all parameters. The experimental data were found to fit with the Langmuir adsorption isotherm model. The intraparticle diffusion model controlled the adsorption process and, therefore, the diffusion of the solute into the inside pores of the adsorbent took places permanently (irreversible) because the particles were trapped inside the pores. This situation causes the adsorbent capacity to decrease and it cannot be used continuously prior to the regeneration or activation, both chemically and thermally.
No takes yet. Share an insight, caveat, or question.
Said et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: