Answers are grounded in this paper and cite their sources.
We introduced a NiFe/antiferromagnetic–MnIr bilayer or a NiFe/MnIr/NiFe trilayer below a CoTaZr soft magnetic underlayer in perpendicular recording media as a way of controlling the magnetic domain structure of the soft magnetic underlayer, and we investigated the effect of exchange biasing on the spike noise. Samples consisting of a layer structure—NiFe (5 nm thick)/MnIr (2.5–50 nm)/NiFe (5 nm)/CoTaZr (50–200 nm)—were sputter deposited on precoated glass disks. The samples were heated with a lamp heater and cooled in a magnetic field along the radial direction of the disk. Both uniaxial and unidirectional anisotropies were induced along the magnetic field when the thickness of the MnIr layer was more than 5 nm. The first NiFe layer promoted a fcc–MnIr (111) crystalline texture, while the second NiFe layer enhanced the value of exchange-bias field by about 20%. The exchange-bias field increased from 6 to 24 Oe as the CoTaZr-layer thickness decreased from 200 to 50 nm. Many spikes along the radial direction were observed for a 100-nm-thick CoTaZr single-layer film, while no remarkable spikes were observed for a NiFe/MnIr/NiFe/CoTaZr (100 nm) film. It was found that the NiFe/MnIr/NiFe trilayer restrained the formation of domain walls in the CoTaZr layer, thereby reducing the spike noise.
No takes yet. Share an insight, caveat, or question.
Tanahashi et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: