This is the authors' abstract. We don't add key points for this paper.
A zero-length conflat fin-type nonevaporable getter (NEG) pump deposited with oxygen-free palladium/titanium (Pd/Ti) has been developed. The NEG pump was activated by baking and its pumping speeds were measured as a function of baking time and baking temperature. The NEG pump can be fully activated by baking at 150 °C for 12 h and exhibits initial pumping speeds of 2340 L s−1 for H2, and 1440 L s−1 for CO. The initial pumping speeds of the oxygen-free Pd/Ti thin film after baking at 150 °C were estimated to be 3.2 L s−1 cm−2 for H2 and 7.6 L s−1 cm−2 for CO. The morphologies of oxygen-free Pd/Ti thin films on the partition plates and the bottom were examined by scanning electron microscopy, scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Ti thin film was completely coated with Pd on the bottom, whereas the partition plates were covered by Pd/Ti nanostructures. The present NEG pump is ideal for maintaining ultrahigh vacuum below 10−8 Pa, because its pumping speeds for H2 and CO are quite large, and because it can be fully activated by baking at 150 °C for 12 h.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Sato et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: