Answers are grounded in this paper and cite their sources.
We have developed a new non-evaporable getter (NEG) coating using titanium and palladium vacuum sublimation. The inner wall of the test chamber was coated with a 1-µm Ti thin film using the Ti sublimation pumps under a vacuum of 6.5×10−6 Pa (Ti-coated chamber). This chamber was then coated with a 10-nm Pd thin film using the Pd sublimation filament under a vacuum of 2.4×10−4 Pa (Pd/Ti-coated chamber). The uncoated, Ti-coated, and Pd/Ti-coated chambers were baked for 6 h at a maximum temperature of 185℃. Five hours after closing the valve, the pressures in the Pd/Ti-coated chamber were about 1.4×10−6 Pa even after six heating–venting cycles. The relatively low activation temperature was attributed to the low concentration of oxygen in the Pd/Ti thin films. The Pd/Ti coating can be used for vacuum systems that are frequently vented.
No takes yet. Share an insight, caveat, or question.
Miyazawa et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: