Answers are grounded in this paper and cite their sources.
The influence of the synthesis methodology on the microstructural and electrochemical properties of PrBaMn 2 O 5+δ (PBMO) perovskite as an electrode for reversible solid oxide cells (r-SOCs) was investigated. PBMO was obtained by combustion (C) and electrospinning (ES), yielding nanostructured powders and nanofiber morphologies, respectively. PBMO_ES evidenced higher porosity, smaller crystallite size (CS) and lower area-specific resistance (ASR) than PBMO_C. PBMO_ES presented an ASR of 0.362 Ω·cm 2 at 700 °C, almost three times lower than the 1.185 Ω·cm 2 for PBMCO_C. In addition, PBMO_ES showed 0.062 Ω·cm 2 at 800 °C, lower than previously reported values. This improvement was associated with the reduction in the high-frequency polarization resistance (HF-Rp). Data showed that nanofibre morphology enhances the air electrode performance due to its relevant surface area, interconnected network, and oxygen-ion/electron pathways. Maximum power densities obtained in fuel cell mode (P max ) of 465 and 400 mW·cm -2 at 800 and 750 °C, respectively. These results demonstrate that the nanofiber architecture enhances efficient mass transport and significantly improves the electrochemical performance of r-SOCs as electrode materials.
No takes yet. Share an insight, caveat, or question.
Grassi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: