Answers are grounded in this paper and cite their sources.
A multilayer waveguide-based antenna radiator is proposed to achieve a wide operational bandwidth of high gain and high efficiency in a compact size. It is a 2×2 array, consisting of a feeding waveguide, a matching cavity, and a radiating aperture. The proposed design provides sufficient freedom for the radiator to achieve broadband impedance matching. In order to improve radiation efficiency and avoid drawbacks from the traditional machining techniques, a binder-jetting process using metallic particles is adopted to realize the relatively complicated structure. This 3-D metal-direct-printing technique is competent to fabricate waveguide-based structures with high precision. Experimental results are favorably compared to the results of the fabrication by the machining technique. The measured relative bandwidth with VSWR ≤ 1.5 is 23.7% (13.0-16.5 GHz). A high efficiency of 90% is obtained at the center frequency, and more than 80% efficiency can be maintained over a 2.3-GHz bandwidth. This paper shows that the binder-jetting printing technique is a promising manufacturing approach to realizing high-performance waveguide-based antennas and microwave components.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: