Answers are grounded in this paper and cite their sources.
This proof-of-concept study explores the synthesis of multi-walled carbon nanotubes directly on stainless steel 304 cylinders using a thermal chemical vapor deposition process, without the addition of an external catalyst. The stainless steel cylinders were pre-treated using hydrochloric acid and then subjected to a heat treatment at 850 °C to generate the active catalytic sites directly on the stainless steel surface. The effect of etching time in acid on carbon nanotube growth was determined and field-emission scanning electron micrographs of the surface were obtained. A dense, uniform, and complete coverage of randomly oriented carbon nanotubes is observed on the surface of the cylinders that were etched for 5 and 8 minutes in hydrochloric acid. The study suggests that these nanotubes could act as “nano-fins”, improving heat transfer by increasing the surface area. Initial results demonstrate that the nanotube-covered cylinders had up to an 803 % increase in the heat transfer rate when compared to stainless steel alone in static water-cooling tests. This research builds on established procedures while expanding knowledge of carbon nanotube synthesis on cylindrical geometries for real world applications in heat management technologies.
No takes yet. Share an insight, caveat, or question.
Patel et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: