Answers are grounded in this paper and cite their sources.
Experimental study reveals that T-stress strongly governs crack closure forces in biaxially loaded gas turbine alloys, indicating stress multiaxiality outweighs single overload effects.
The T-stress as a measure for the multiaxiality or the degree of constraint is well-known in linear-elastic fracture mechanics. It is known to affect the size and shape of the plastic zone in front of the crack tip and is therefore expected to directly influence plasticity-induced crack closure (PICC). At the same time, individual overload cycles also influence the size of this plastic zone not only during the current overload cycle but also during subsequent normal loading cycles. The focus of the present study is to experimentally study the influence of multiaxial far field loading on the crack opening displacement (COD) and hence crack closure and opening in two materials commonly used in gas turbine engines. For this, room temperature crack propagation tests are performed on the titanium alloy Ti6246 and the tempered steel 26NiCrMoV14-5. The experiments are conducted using cruciform specimens in a biaxial test-rig. This experimental set-up allows for a systematic variation and comparison of different T values as well as combined overload and normal load cycles, enabling targeted investigation of their effects on the plastic zone in the crack tip area. The tests are monitored and analyzed using a newly developed Digital Image Correlation (DIC) setup. This enables to evaluate crack growth and crack flank opening as well as the measurement of crack closure forces at different crack flank positions. Ultimately, this approach allows for a systematic investigation of PICC. In conclusion, a workflow is developed to automatically extract COD, crack closure forces, and the compliance of both open and closed crack states, as well as the resulting compliance offset, from the DIC data. The results show that while the influence of isolated overload cycles is not pronounced, the T-stress has a clear and measurable effect on crack closure forces in biaxially loaded cruciform specimens.
No takes yet. Share an insight, caveat, or question.
Zaiat et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: