This is the authors' abstract. We don't add key points for this paper.
A laser metal deposition (LMD) process has been applied to the fabrications of the (CrMnFeCoNi)1-xFex (x = 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) Multi-principal elements alloys (MPEAs). It is found that the LMD-fabricated (CrMnFeCoNi)50Fe50 alloy keeps a single-phase solid solution microstructure. Compared with the CrMnFeCoNi MPEA, the (CrMnFeCoNi)50Fe50 alloy obtains remarkably improved plasticity from 45% to 77%, while maintaining tensile strength (415 MPa to 470 MPa), due to the strain-induced FCC to BCC phase transformation. Furthermore, the (CrMnFeCoNi)50Fe50 alloy shows excellent mechanical properties at cryogenic temperatures. This alloy has lower cost and better mechanical property than the well-known CrMnFeCoNi MPEA by the addition of inexpensive Fe elements. The present work provides important pathways in the development of low-cost LMD-fabricated MPEA for cryogenic engineering applications.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: