Gurney Flap Experiments on Airfoils, Wings, and Reflection Plane Model

The effect of Gurney e aps on two-dimensional airfoils, three-dimensional wings, and a ree ection plane model were investigated. There have been a number of studies on Gurney e aps in recent years, but these studies have been limited to two-dimensional airfoil sections. A comprehensive investigation on the effect of Gurney e aps for a wide range of cone gurations and test conditions was conducted at Wichita State University. A symmetric NACA 0011 and a cambered GA (W)-2 airfoil were used during the single-element airfoil part of this investigation. The GA (W)-2 airfoil was also used during the two-element airfoil study with a 25% chord slotted e ap dee ected at 10, 20, and 30 deg. Straight and tapered ree ection plane wings with natural laminar e ow (NLF) airfoil sections were tested for the three-dimensional wing part of this investigation. A fuselage and engine were attached to the tapered NLF wing for the ree ection plane model investigation. In all cases the Gurney e ap improved the maximum lift coefe cient compared to the baseline clean cone guration. However, there was a drag penalty associated with this lift increase.