Answers are grounded in this paper and cite their sources.
In this paper, we present a continuous-wave (CW) mm-wave radar, which is based on binary phase-coded pseudorandom signals. The receiving section is operated as a sliding correlator, which allows to greatly reduce the bandwidth required in the baseband blocks of the system. A certain class of pseudorandom sequences, with so-called almost perfect autocorrelation properties, is used as probing signal. This leads to a good dynamic range, even for short sequence lengths. The presented hardware is based on a SiGe front-end chip, which includes a frequency multiplier to generate a 79-GHz carrier from a fixed-frequency source operating at 4.39 GHz. A field-programmable gate array generates the binary sequences with a bit rate of 1 Gb/s. This sequence is modulated onto the W-band carrier by binary phase-shift keying modulators realized within the SiGe chip. In this way, a flexible prototype was realized that was used to perform different radar experiments ranging from static single-target scenarios to range-Doppler measurements with multiple targets. It could be shown that the realized pseudorandom radar achieves a range resolution of 15 cm and ranging standard deviations in the millimeter range. This is comparable to frequency-modulated CW measurements with a bandwidth of 2 GHz, which were carried out using the same hardware for comparison purposes.
No takes yet. Share an insight, caveat, or question.
Feger et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: