Answers are grounded in this paper and cite their sources.
Addressing the thermal management challenges in foldable, wearable electronics and deployable aerospace structures, this study fabricated a polyurethane flexible flat heat pipe (PFFHP) through a novel casting method. A strip gradient structure wick featuring gas-liquid coplanarity was developed, utilizing copper meshes of varying mesh sizes, aimed to balance the interaction between capillary force and permeability while minimizing gas-liquid flow resistance. An infrared-based capillary performance testing system was utilized to investigate the impact of different mesh sizes on the capillary rise velocity within the gradient structure wick, yielding an optimal mesh combination (200 mesh for the upper layer and 300 mesh for the lower layer, respectively). Using thermal resistance and average evaporation temperature as indicators, the heat transfer performance of the PFFHP within this optimized gradient structure wick was evaluated under horizontal, tilt, and bent conditions. The experimental results revealed that, at a filling ratio (fr) of 50% and a bending angle of 90°, the heat pipe exhibited a thermal resistance of just 2.59°C/W, with an average evaporation temperature of 84.05°C. Comparative analysis with other relevant research findings indicated that the strip gradient structure wick significantly enhanced the heat transfer performance of the PFFHP.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: