Answers are grounded in this paper and cite their sources.
Joining titanium alloys with aluminium presents a significant challenge due to titanium's strong tendency to form brittle intermetallic phases and steep compositional gradients at the interface. In this study, dissimilar titanium (Ti) and aluminium (Al) alloy joints produced by electron beam welded (EBW) were investigated in order to examine elemental mixing under high energy density conditions. The welding process was carried out at different heat inputs to evaluate their influence on elemental diffusion and intermetallic phase formation. Micro-X-ray fluorescence (micro-XRF) was employed to perform large area, non-destructive chemical mapping across the fusion zone (FZ) of grade 2 Ti- Al6082 joints produced of welding speeds of 250, 500, 1000, and 2000 mm/min. Optimized micro-XRF line scans and area maps reveal systematic variations in elemental diffusion profiles and the extent of mixing as a function of heat input, with lower welding speeds promoting increased diffusion of Ti into the Al-based alloy. The results demonstrate the suitability of micro-XRF for the quantitative characterization of diffusion driven elemental distributions in complex and innovative welded systems, particularly those exhibiting narrow intermixing zones and strong compositional gradients.
No takes yet. Share an insight, caveat, or question.
Sisodia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: