Answers are grounded in this paper and cite their sources.
To reduce CO 2 emissions, and so climate change, the utilization of biodiesel fuels (BDFs) as an alternative energy source is growing rapidly. However, BDFs can be blended with petrodiesel at only 7–10% due to their polyunsaturated fatty acid methyl esters (poly-FAMEs) content that causes a low oxidative stability. Although hydrogenation of BDF reduces the poly-FAME content, it can lead to saturated (sat)-FAMEs and trans -monounsaturated ( trans -mono)-FAMEs with poor cold flow properties. This study developed Mg-, Ca-, and Ba-promoted Pd/SBA-15 catalysts with a low Pd loading of 1 wt.% and a promoter/Pd molar ratio of 0.1-0.5 for the partial hydrogenation of soybean oil-derived BDF into premium BDF products for high blends. By selectively hydrogenating poly-FAMEs into cis -monounsaturated FAMEs, as opposed to sat- and trans -mono-FAMEs, products with a good oxidative stability and cold flow properties were generated. Mesoporous silica SBA-15 was impregnated with Pd nanoparticles, followed by modification with Ba, Ca, or Mg oxides. The Ba-modified Pd/SBA-15 (0.5 Ba: Pd molar ratio) exhibited a high hydrogenation performance with complete conversion of poly-FAMEs to mono-FAMEs (> 80% selectivity and more than 60% cis -mono-FAMEs) within 30 min under mild reaction conditions (80°C and 0.5 MPa H 2 ). This was attributed to the strong Ba-Pd interactions, which weaken the adsorption of FAME molecules on the catalyst surface, thereby promoting their desorption and suppressing over-hydrogenation to saturated products with poor cold-flow properties. This study provides valuable insights into the precise design of potential catalysts that could accelerate sustainable industrial growth in the BDF sector.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: