Answers are grounded in this paper and cite their sources.
Considerable effort has been directed toward the removal of arsenic from an aqueous media, such as groundwater. For this purpose, used tea impregnated with iron oxide (magnetite, Fe 3 O 4 ) particles (Fe-UT) have been tried for the removal of As(III). Different analytical techniques such as X-ray diffractometry, scanning electron microscopy/energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis (TG)/differential thermal analysis and surface area analyzer were used for the characterization of UT and Fe-UT. The average crystallite size of magnetite nanoparticles impregnated on used tea was found to be 70 nm. The removal of As(III) from aqueous solution onto the Fe-UT was carried out as a function of pH, concentration, contact time and temperature. Maximum adsorption occurred at pH 7 and 8 and then started decreasing with further increase in pH. The result of present study indicates that adsorption of As(III) on Fe-UT at pH 8 is in good agreement with WHO acceptable pH range of potable water (6.5–8.5). The adsorption capacities of the Fe-UT was substantially increased by increasing concentration while a decrease in the As(III) uptake was observed with increasing temperature of the system. The adsorption capacity for Fe-UT was found to be 3.34 mg g –1 . The mean free energy calculated from Dubinin–Radushkevich model confirmed the adsorption to be chemisorption and followed ligand exchange mechanism.
No takes yet. Share an insight, caveat, or question.
Mahmood et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: