Answers are grounded in this paper and cite their sources.
The optimization of drift region specific ON-resistance (R on,sp) for superjunction (SJ) MOSFETs with three-dimensional (3-D) and insulator-pillar (i-pillar) concepts is proposed and compared with the two-dimensional conventional SJ (2-D C-SJ) MOSFETs. With the constraints of avalanche breakdown and critical depletion, the optimizedR on,spand the corresponding design parameters are numerically determined. For the 3-D concept, a superiorR on,spcan be obtained only for a high breakdown voltage (BV) or a low pillar aspect-ratio (AR) due to the better charge compensation. The junction field-effect transistor (JFET) effect induced by the lateral pillars depletion exceeds the charge compensation due to the stronger electric field crowding effect. For thei-pillar concept, parasite depletion is alleviated due to an additional voltage sustained across the insulator pillar, especially for a narrow SJ pillar. The optimization design for the 650-V class SJ MOSFETs with 3-D andi-pillar concepts demonstrates an optimizedR on,spwith 3.99mΩ ·cm2at AR = 10 and 1.40mΩ ·cm2at AR = 70 can be obtained in 3-Di-pillar SJ (3-D I-SJ) and 2-Di-pillar SJ (2-D I-SJ), respectively. For the 650-V class SJ MOSFETs, 3-D and 2-D I-SJ structures have a lowestR on,spthan the other structures for AR less and greater than 57, respectively. The charge imbalance effects of BV for these structures are also discussed.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: