Answers are grounded in this paper and cite their sources.
This paper presents a broadband CMOS three-stage resistive-feedback inverter (RFI) amplifier for high-speed applications. A novel T-coil-based peaking technique is proposed, combining over-shunt and gate peaking to extend the bandwidth with reduced inductance. Theoretical analysis derives design equations and shows that the proposed structure achieves a bandwidth extension ratio of 2.3, matching conventional gate peaking performance with only one-third the inductance, thereby enabling chip area reduction. Fabricated in a 28 nm fully depleted silicon-on-insulator CMOS process, the amplifier occupies an active area of only 0.0094 mm2. Small-signal measurements show a gain of 16.2 dB, a 3-dB bandwidth of 31.5 GHz (gain-bandwidth product (GBW) =203.38 GHz), and low power consumption of 5.6 mW. The measured eye diagram confirms reliable performance, with an output amplitude of 333.4 mVpp, signal-to-noise ratio of 8.9, rise time of 15.0 ps, and fall time of 15.3 ps, meeting the 28 Gbps non-return-to-zero signaling requirements. Compared to previous broadband CMOS amplifiers, the proposed T-coil peaking RFI amplifier demonstrates superior GBW performance in terms of active area and power consumption.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: