Answers are grounded in this paper and cite their sources.
Single-crystalline MgO is used as a substrate for the deposition of various functional thin films. The present study focused on the development of a complete sequence of fabricating atomic step-terrace structures on the MgO substrate via a method that includes grinding, precise mechanical polishing, chemical mechanical polishing (CMP), and high-temperature annealing. The effect of a damage-free surface pretreatment on the subsequent high-temperature annealing was investigated. An atomically smooth and damage-free MgO substrate surface with an average surface roughness of 0.05 nm was obtained via a CMP process using a colloidal silica slurry. Atomic step-terrace structures were formed on the substrate after the high-temperature annealing process at 1000 °C for 20 h under atmospheric air. The obtained step height was 0.20 nm, which corresponds to one-half the unit cell of an MgO crystal (0.21 nm). By contrast, when a mechanically damaged MgO substrate was subjected to the annealing process, Ca segregation was observed on the annealed surface, without the formation of an atomic step-terrace structure. CMP was found to be necessary prior to high-temperature annealing to attain atomic step-terrace structures and to avoid the out-diffusion of impurities in the MgO bulk crystals.
No takes yet. Share an insight, caveat, or question.
Aida et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: