Key result
Two-hour pharmacodynamic metrics outperform FDA-recommended four-hour metrics for acarbose bioequivalence testing.
Why the study?
Deficiencies in the FDA's guidance for assessing acarbose bioequivalence and optimal pharmacodynamic metrics for evaluation were unclear.
Do pharmacodynamic metrics based on serum glucose concentration from 0 to 2 hours improve acarbose bioequivalence evaluation compared to FDA-recommended 0-4 hours metrics in healthy subjects?
RCT (n=63)
crossover
Do pharmacodynamic metrics based on serum glucose concentration from 0 to 2 hours improve acarbose bioequivalence evaluation compared to FDA-recommended 0-4 hours metrics in healthy subjects?
Pharmacodynamic metrics based on serum glucose concentration from 0 to 2 hours are more sensitive than FDA-recommended 0-4 hours metrics for evaluating acarbose bioequivalence.
Answers are grounded in this paper and cite their sources.
May challenge FDA acarbose BE guidance; pilot data leave optimal PD metrics open for validation.
Aims To determine deficiencies in the Food and Drug Administration (FDA)'s guidance for assessing acarbose bioequivalence (BE) and to explore optimal pharmacodynamic (PD) metrics for better evaluation of acarbose BE. Methods Three clinical trials with branded acarbose were conducted in healthy subjects, including a pilot study (Study I, n = 11, 50 and 100 mg), a 2×2 crossover BE study (Study II, n = 36, 100 mg) and a 4×4 Williams study (Study III, n = 16, 50/100/150 mg). Serum glucose concentrations were measured by the glucose oxidase method. Results In Study I, compared with 50 mg acarbose, only 100 mg acarbose had a significantly lower Cmax0–4h than that of sucrose administration alone (7.96 ± 0.83 mmol/L vs 6.78 ± 1.02 mmol/L, P < .05). In Study II, the geometric mean ratios of the test formulation to the reference formulation (both formulations were the branded drug) for FDA PD metrics, ΔCmax0–4h and ΔAUC0–4h, were 0.903 and 0.776, respectively, and the 90% confidence intervals were 67.44–120.90 and 53.65–112.13, respectively. The geometric mean ratios (confidence interval) for possible optimal evaluation PD metrics (Cmax0–2h and AUC0–2h) were 1.035 (94.23–112.68) and 0.982 (89.28–107.17), respectively. Further, Cmax0–2h and AUC0–2h also met the sensitivity requirements for BE evaluation in Study III. Conclusion Considering the mechanisms of action of acarbose, the PD effect was shown to be dose independent during the 2–4 hours postadministration of acarbose. Hence PD metrics based on the serum glucose concentration from 0 to 2 hours (Cmax0–2h and AUC0–2h) are more sensitive than the FDA‐recommended PD metrics for acarbose BE evaluation from 0–4 hours (ΔCmax0–4h and ΔAUC0–4h). The trial has been registered at the Chinese Clinical Trial Registry ( http://www.chictr.org.cn , ChiCTR1800015795, ChiCTR‐IIR‐17013918, ChiCTR‐IIR‐17011903). All subjects provided written informed consent before screening.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2020) conducted an RCT in Healthy subjects (n=63). Acarbose vs. Reference formulation or sucrose alone was evaluated on Cmax0-2h geometric mean ratio of test to reference formulation (Geometric mean ratio 1.035, 95% CI 94.23-112.68). Acarbose bioequivalence evaluation using pharmacodynamic metrics from 0 to 2 hours is more sensitive than FDA-recommended 0-4 hour metrics.
Synapse has enriched 10 related papers. Consider them for comparative context: