Answers are grounded in this paper and cite their sources.
Deep shale compaction behavior under one-dimensional constraint is critical for reservoir evaluation and underground engineering. To investigate the quantitative effects of lateral constraint, compaction characteristics, and brittle-ductile transition behavior of deep shale, uniaxial strain tests are conducted on deep shale using 45# steel sleeves with six different wall thicknesses. The results show that the shale compaction process can be divided into three distinct stages: over-consolidation, normal consolidation, and plastic flow. Sleeve wall thickness exerts significant influence on key mechanical parameters, including constrained modulus and in-situ stress coefficient, whereas pre-consolidation stress and brittle-ductile transition stress are nearly independent of wall thickness, indicating these two characteristic stresses are intrinsic properties of shale. Reducing the wall thickness and adopting materials with a higher elastic modulus can facilitate the measurement of the plastic flow stage of shale. The critical stress ratio for the brittle-ductile transition of shale under one-dimensional constraint is quantitatively determined as 3.75–4.78. Furthermore, the control mechanism of crack geometric properties on the consolidation state and compaction mechanical parameters of shale is discussed. The initial crack angle dominates shale consolidation state: normal consolidation occurs at crack angles of 0°–45°, while the plastic flow state dominates at 45°–90°.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: