Answers are grounded in this paper and cite their sources.
The basic friction angle ( φ b ) is a crucial parameter for evaluating the shear strength of rock joints. To investigate its evolution under cold environmental conditions, this study analyzed the effects of water saturation, low temperature, and freeze-thaw (F-T) cycles on φ b by using tilt and direct shear tests. Results reveal a dual competitive effect of water. In low-stress tilt tests, the water loss weakens the capillary suction, decreasing φ b . In high-stress direct shear tests, the matrix softening dominates, making saturated φ b lower than dry values. At −20 °C, low-temperature strengthening increases φ b for no visible surface ice film rocks. However, increased ice coverage reduces φ b due to the low strength of ice and sliding lubrication. Furthermore, F-T damaged rocks exhibit a normal stress “threshold effect”. Under a low normal stress (≤2 MPa), F-T induced micro-roughness enhances mechanical interlocking, and thus increases the shear strength. Conversely, under high normal stress (≥3 MPa), frost-weakened asperities are easily sheared off, acting as solid lubricants that transition the interface from sliding to rolling friction, thereby sharply reducing the shear strength. Given that tilt tests are overly sensitive to water, while high-stress shear tests obscure intrinsic mechanical properties, this study recommends direct shear tests under low normal stress (≤2 MPa) to accurately determine the true baseline frictional properties.
No takes yet. Share an insight, caveat, or question.
Zhai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: