Answers are grounded in this paper and cite their sources.
Precipitation typically increases yield strength of the face-centered cubic (FCC) high-entropy alloys (HEAs), but seriously deteriorates ductility. Tailoring the type and distribution of precipitates by optimizing chemical composition is an effective strategy to overcome the strength-ductility trade-off. Although increasing valence electron concentration (VEC) improves mechanical properties of FCC HEAs, the effect of grain size on precipitation in those alloys remains unclear. Here, we take the (Fe 50 Mn 30 Co 10 Cr 10 ) 68 Ni 28 Al 2 Ti 2 HEA with high-VEC as the model alloy. Coarse-grained (CG, ∼238.7 μm), medium-grained (MG, ∼19.3 μm) and fine-grained (FG, ∼6.4 μm) materials were fabricated via different thermomechanical treatments, respectively. The effects of grain size on precipitation behavior during aging, as well as on the resulting mechanical properties and deformation mechanisms were systematically explored. As grain size decreases, intragranular L1 2 evolves from spherical to a mixture of spherical and rod-like shapes, with increased density and volume fraction. Meanwhile, the size and volume fraction of 7M modulated martensite at grain boundaries also increase. Yield strength of the CG, MG and FG materials subjected to aging increases by 336 MPa, 369 MPa and 404 MPa, respectively, along with enhanced work hardening ability. As grain size decreases, the gradual increase in strength is attributed to the increasing volume fraction of L1 2 precipitate and 7M martensite. Good ductility and improved work hardening originate from the combined effect of L1 2 precipitates blocking dislocation motion, 7M martensite accommodating plastic deformation and the increased stacking fault probability. These findings provide new insights into the microstructure design and optimization of high-performance FCC alloys.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: