This is the authors' abstract. We don't add key points for this paper.
The HAlMan process integrates the sustainable production of manganese ferroalloys and alumina through hydrogen reduction and aluminothermic reduction of manganese ores. The slag generated from aluminothermic reduction, primarily composed of calcium aluminate, serves as a secondary resource for alumina recovery via alkaline leaching, promoting waste minimization and circular material use. Laboratory trials of the HAlMan process yielded slag predominantly consisting of krotite (mono‑calcium aluminate), with minor fractions of mayenite. Leaching was optimized by varying temperature, time, Na₂CO₃ concentration, and solid-to-liquid ratio. During leaching, a minor fraction of bayerite (Al(OH)₃) formed, leading to alumina loss. This side reaction was effectively mitigated by the initial addition of 5 wt% NaOH, improving aluminum dissolution efficiency. The optimal leaching conditions 75 °C, a solid-to-liquid ratio of 1:10, 60 g/L Na₂CO₃ concentration, and 2 h of leaching led to efficient alumina extraction. XRD and XRF analyses confirmed that increasing temperature and Na₂CO₃ concentration enhanced aluminum recovery. Specifically, leaching at 75 °C with 120 g/L Na₂CO₃ for 120 min resulted in over 72 % alumina dissolution, albeit with an increased silicon content in solution. Elemental balance assessments revealed that critical metals like barium and strontium remained in the residue, offering potential for further recovery and resource valorization. By integrating waste utilization, minimizing reagent consumption, and enhancing material circularity, this process exemplifies the principles of sustainable chemistry, contributing to a greener metallurgical industry.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: