Key result
Bulky calcifications post-TAVR cause incomplete stent expansion and deformation, predisposing to valve thrombosis.
Why the study?
Concerns regarding clinical and subclinical valve thrombosis limit the adoption of TAVR in low-risk patients with severe aortic valve stenosis caused by degenerative leaflet thickening and calcification.
Can Finite Element Analysis from 3D CT predict transcatheter heart valve thrombosis in patients undergoing TAVR?
Cohort (n=98)
No
Can Finite Element Analysis from 3D CT predict transcatheter heart valve thrombosis in patients undergoing TAVR?
Answers are grounded in this paper and cite their sources.
Finite Element Analysis using high-resolution CT scans can identify persistent bulky calcifications and stent deformation that may contribute to thrombus formation after TAVR.
BACKGROUND: Transcatheter aortic valve replacement has proved its safety and effectiveness in intermediate- to high-risk and inoperable patients with severe aortic stenosis. However, despite current guideline recommendations, the use of transcatheter aortic valve replacement (TAVR) to treat severe aortic valve stenosis caused by degenerative leaflet thickening and calcification has not been widely adopted in low-risk patients. This reluctance among both cardiac surgeons and cardiologists could be due to concerns regarding clinical and subclinical valve thrombosis. Stent performance alongside increased aortic root and leaflet stresses in surgical bioprostheses has been correlated with complications such as thrombosis, migration and structural valve degeneration. MATERIALS AND METHODS: Self-expandable catheter-based aortic valve replacement (Medtronic, Minneapolis, MN, USA), which was received by patients who developed transcatheter heart valve thrombosis, was investigated using high-resolution biomodelling from computed tomography scanning. Calcific blocks were extracted from a 250 CT multi-slice image for precise three-dimensional geometry image reconstruction of the root and leaflets. RESULTS: Distortion of the stent was observed with incomplete cranial and caudal expansion of the device. The incomplete deployment of the stent was evident in the presence of uncrushed refractory bulky calcifications. This resulted in incomplete alignment of the device within the aortic root and potential dislodgment. CONCLUSION: A Finite Element Analysis (FEA) investigation can anticipate the presence of calcified refractory blocks, the deformation of the prosthetic stent and the development of paravalvular orifice, and it may prevent subclinical and clinical TAVR thrombosis. Here we clearly demonstrate that using exact geometry from high-resolution CT scans in association with FEA allows detection of persistent bulky calcifications that may contribute to thrombus formation after TAVR procedure.
No takes yet. Share an insight, caveat, or question.
Nappi et al. (2020) conducted a cohort in Severe aortic valve stenosis and transcatheter heart valve thrombosis (n=98). Self-expanding transcatheter aortic valve replacement (TAVR) was evaluated on Biomechanical behavior and stress distribution of TAVR device in calcified aortic root using Finite Element Analysis. Finite Element Analysis of post-TAVR CT scans revealed that persistent bulky calcifications cause incomplete stent expansion and deformation, which may contribute to subclinical and clinical valve thrombosis.
Synapse has enriched 10 related papers. Consider them for comparative context: