Answers are grounded in this paper and cite their sources.
Due to a combination of casting and rolling in one process step, twin-roll casting is an effective grain refinement method. This study compares the direct-chill cast (DC) state and the twin-roll cast (TRC) state of an AZ31 magnesium alloy in different steps regarding the microstructure, deformation behavior, and mechanical properties. In the initial state, the TRC AZ31 exhibits a significantly finer grain size and a slight rolling texture compared to the DC AZ31. Therefore, the TRC materials exhibit higher strengths and ductility. After a short heat treatment of 400 °C and 12 h for the DC state and 460 °C and 15 min for the TRC state, cylindric compression tests of the heat-treated samples were conducted at different temperatures (300–400 °C) and strain rates (0.1–10 s−1). To reproduce the deformation behavior at higher strain rates, hot rolling tests (350 °C, 15 s−1) of the heat-treated samples were performed. For both alloys, discontinuous dynamic recrystallization and twinning-induced dynamical recrystallization could be detected. A fine grain size and similar strengths were present after five passes. The AZ31 TRC exhibited a higher ductility due to a higher texture intensity, as the stress direction corresponds to the rolling direction in the case of tensile testing.
No takes yet. Share an insight, caveat, or question.
Moses et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: