Answers are grounded in this paper and cite their sources.
Reactive high-power impulse magnetron sputtering with a pulsed O 2 flow control and to-substrate O 2 injection into a high-density plasma in front of the sputtered vanadium target was used for low-temperature (300 °C) deposition of VO 2 films with a pronounced semiconductor-to-metal transition onto conventional soda-lime glass substrates without any substrate bias voltage and without any interlayer. The depositions were performed using an unbalanced magnetron with a planar target of 50.8 mm diameter in argon–oxygen gas mixtures at the argon pressure of 1 Pa. The deposition-averaged target power density was close to 13 W cm −2 at a fixed duty cycle of 1% with a peak target power density up to 5 kW cm −2 during voltage pulses ranged from 40 µ s to 100 µ s. A high modulation of the transmittance at 2500 nm (between 51% and 8% at the film thickness of 88 nm) and the electrical resistivity (changed 350 times) at the transition temperature of 56–57 °C was achieved for the VO 2 films synthesized using 50 µ s voltage pulses when the crystallization of the thermochromic VO 2 (M1) phase was supported by the high-energy (up to 50 eV relative to ground potential) ions. Principles of this effective low-temperature deposition technique with a high application potential are presented.
No takes yet. Share an insight, caveat, or question.
Vlček et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: