Answers are grounded in this paper and cite their sources.
The electronic structures and electronic states near the back channel surfaces in amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) were investigated. The X-ray photoelectron spectroscopy (XPS) analysis revealed that, due to insufficient wet-etching of source/drain (S/D) of Mo metal, continuous sub-gap states formed throughout the bandgap, which induced degradation of the subthreshold swing of the TFTs with a back channel etch (BCE) structure. The stability under the negative bias thermal illumination stress (NBTIS) in the a-IGZO BCE-type TFTs was worse than that of conventional etch stop layer (ESL)-type TFTs. The V th shift (ΔV th ) increased from −2.5 V to −4.0 V with a hump-shaped variation. According to photoinduced transient spectroscopy (PITS) analysis, a broader shoulder of around 160 K clearly appeared in PITS spectra from the a-IGZO thin films with the BCE structure. The effect of post process annealing applied as the final process step of the TFT fabrication (post-annealing) was also examined against the a-IGZO BCE-TFTs. As the post-annealing temperature was increased, the peak at around 160 K which is associated with the hydrogen-related traps in a-IGZO thin film was markedly decreased. The results for the post-annealing at 300°C suggested a decrease in density of trap states which originated from depletion of Zn. A marked improvement of the stress stabilities under the positive bias, thermal stress (PBTS) was also observed as well as NBTIS.
No takes yet. Share an insight, caveat, or question.
Ochi et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: