Answers are grounded in this paper and cite their sources.
In this work, we present a novel amplification module based on a high-brilliance tapered pump laser diode. A monolithic distributed Bragg grating permits to stabilize the diode wavelength, that was kept at 978.5 nm with a full-width at half-maximum bandwidth <0.2 nm during our experiments. Such a compact and reliable single laser source achieves a maximum output power of about 6.5 W, in a linearly polarized beam with high spatial quality (M2 < 1.5). This allows to optimize the performance of compact amplification modules designed to maximize the gain-per-Watt of absorbed pump power and the optical-to-optical extraction efficiency. To assess the potential of such pump unit, we designed a single-pass and double-pass amplification module based on a 3-mm-long 9.5%-doped Yb:KYW crystal, seeded by a either a cw or a femtosecond oscillator providing a maximum average power of ∼500 mW with output wavelength tunable between 1025 nm and 1035 nm. By tightly focusing the pump beam and carefully optimizing the mode-matching between the almost TEM00 pump and seed beam we achieved a single pass small signal gain G0 > 7 at about 3.5 W absorbed pump power and a maximum output power of 2.2 W, corresponding to an optical-to-optical extraction efficiency close to 50%. The excellent beam quality of the seeder was very well preserved during amplification, resulting in a measured Mx2 × My2 <1.1 both in single and double pass.
No takes yet. Share an insight, caveat, or question.
Dabbene et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: