Answers are grounded in this paper and cite their sources.
The ionic crosslinking of poly(acrylic acid) for dialysis and reverse osmosis applications has been studied. A new dry technique has been developed that is faster than the wet technique reported in the previous paper to synthesize aluminum/poly(acrylic acid) membranes. It is based on casting a solution containing both the aluminum salt and the unneutralized poly(acrylic acid) (PAA) and subjecting the cast film to a heat treatment (curing step) to promote ionic crosslinking. Postcuring treatment in nonsolvents for PAA such as acetone induced structural modifications in the membrane. Membranes with optical clarity ranging from colorless and transparent to white and opaque were obtained and were characterized by their water and aluminum contents. Transport properties of these membranes were investigated and indicated a selective rejection of ionic solutes such as NaCl compared to organic solutes such as ethylene glycols. Typical results for reverse osmosis under static conditions at fluxes of 1250 g/hm2 (0.75 U.S. gallons/ft2‐day) gave rejections of 85% for a feed of 0.1% (by wt.) NaCl at 600 psi. Much lower rejection (28%) for ethylene glycol suggests the possible use of these membranes in the fractionation of mixtures of ionic and nonionic solutes by reverse osmosis.
No takes yet. Share an insight, caveat, or question.
Habert et al. (1979) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: