Answers are grounded in this paper and cite their sources.
A multicomponent mobile phase utilizing ion-exchange, ion-exclusion, and ion-pairing principles for the rapid isocratic separation of anions in low explosives residue by ion chromatography (IC) has been developed. The notable feature of this system is that an ion-pairing reagent and an ion-exclusion reagent are combined in the same mobile phase. Contrary to expectation, these reagents act independently of each other in solution. The stock mobile-phase composition consisted of boric acid, D-gluconic acid, lithium hydroxide, and glycerol. Tetrapropylammonium hydroxide, an ion-interaction reagent was used to achieve pH 8.5. Acetonitrile (ACN) was added to enhance resolution and octanesulfonic acid, an ion-exclusion reagent, was added to adjust the retention time of perchlorate. Separation of a mixture of anions common to low explosives residue was achieved in less than 16 min using a Waters IC-Pak Anion HR column. Optimization studies were performed by changing the concentration of the ACN and by altering the pH or the type of ion-interaction or -exclusion agents. Simulated case studies were performed using postblast residues from pipe bombs. The results show this method to be a valid and reproducible procedure for forensic casework analysis. The practical significance of this system is that a reduction in the analysis time and an improvement in efficiency of late-eluting peaks can be achieved without resorting to gradient elution techniques. For the analysis of anions detected in explosives residue, the Waters IC-Pak Anion HR column has proven to be a suitable replacement for the Vydac 300IC405 column, which has been discontinued by the manufacturer.
No takes yet. Share an insight, caveat, or question.
Doyle et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: