Answers are grounded in this paper and cite their sources.
Accurate determination of ultra-trace level 99Tc in environmental samples is primarily hindered by the interferences of 98Mo and 99Ru. For the “elimination” of the 99Ru isobaric overlap during the mass spectrometry measurement, the commonly-used method of mathematical correction based on a known isotopic ratio of Ru (e.g., 99Ru/102Ru) could lead to a high measurement uncertainty of 99Tc. In this work, a direct and accurate analytical method of 99Tc in large-volume seawater samples (>20 L) was developed using two TEVA resin columns in combination with ICP−MS/MS in He−C2H4 mode. Both Fe(OH)2 and Ti(OH)3 were used as co-precipitants for the pre-concentration of 99Tc in large-volume seawater samples, and then, 99Tc was purified by two serial TEVA resin columns with the high decontamination factors of Mo (5×105) and Ru (1×105). Based on the high reactivity of C2H4, the residual interferences of 98Mo and 99Ru were completely removed in the mass-shift mode for the first time. Excellent decontamination factors of 98Mo (1×1012) and 99Ru (1.6×109) were achieved in the whole procedure, which was 3−4 orders of magnitude higher than these of traditional methods. The detection limit of 0.015 pg/L for 99Tc was obtained, and the whole analysis time was less than 20 h per sample. This method is expected to directly and accurately measure ultra-trace level 99Tc in large-volume seawater samples without any mathematical correction of 99Ru.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: