Answers are grounded in this paper and cite their sources.
The CoCrFeMnNiTi x (atomic ratios, x = 0, 0.3, 0.65 and 1) high-entropy alloy (HEA) coatings were fabricated via plasma cladding process. The effects of Ti content on the microstructure, mechanical properties and tribological performance of as-prepared coatings were investigated. The results show that with the atomic ratios of Ti increasing from 0 to 1, the microstructure of CoCrFeMnNiTi x coatings evolves from single FCC structure with columnar dendrites to FCC structure with net-shaped interdendrites and columnar dendrites, hybrid phases of FCC structure, BCC structure and intermetallic sigma phase with equiaxed and/or snowflake-like dendrites and gradually increased grain size. The Ti addition can improve the mechanical properties of CoCrFeMnNiTi x coatings and the CoCrFeMnNiTi 1 coating has a microhardness of 903.23 ± 45.16 HV and a reduced nano-hardness of 10.02 GPa. The increase in Ti content leads to the more enhanced wear resistance of CoCrFeMnNiTi x coatings. The dominant mechanism for the CoCrFeMnNiTi x ( x = 0 and 0.3) coatings is abrasive wear, the mechanisms for the CoCrFeMnNiTi 0.65 coating are abrasive wear and oxidation wear, and main reasons for the wear loss of CoCrFeMnNiTi coating are abrasive wear, oxidation wear and spalling effects induced by brittle fracture.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: