Answers are grounded in this paper and cite their sources.
He + ions were implanted into a (111) epitaxial n-type silicon wafer at different dose rates (fluxes) ranging from 2.5×1012 to 1.3×1013 cm−2 s−1 while keeping the incident energy and dose constant (1.6 MeV, 2×1016 cm−2). After implantation the samples were subjected to thermal annealing at 800 °C for 30 min. Cross section transmission electron microscopy (XTEM) was used to characterize the damage layer. Even in the as-implanted samples the TEM observations revealed the formation of a buried layer containing a dense array of small bubbles. After annealing, a large band of defects made up of bubbles and dislocations was observed in all samples. However, the characteristics of the damage layer found depended on the flux. For the lowest flux, only platelets and planar clusters of helium bubbles lying in the {001} planes were observed. Their nucleation is discussed in terms of the trap-mutation process. For higher fluxes a continuous band of bubbles with rows of prismatic punching related dislocation loops was observed. These dislocations can extend over several micrometers away from the buried layer and are emitted from clusters. For the highest flux these clusters were found to lie in the {100} or {110} planes. The plate-like structures are discussed in terms of the diluted system. The damage evolution with increasing dose rates is explained by taking into account the vacancy production.
No takes yet. Share an insight, caveat, or question.
Oliviero et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: