Answers are grounded in this paper and cite their sources.
We present the organic thin-film transistors (OTFTs) based on the ink-jet printed silver electrodes as the source and drain electrodes. To fabricate the conductive silver electrodes by the low-temperature heat-treatment below 200°C, the inks containing silver nano-particles with the size of about 20 nm were printed on the silicon substrate with a 300 nm-thick SiO2. It was observed that the conductivity of the ink-jet printed lines after heat-treatment at 200°C was similar to that of a bulk silver material. Poly(3,3″-dialkylquarterthiophene) (PQT-12) was deposited over the printed silver electrodes to fabricate the organic transistor. I–V character was measured to investigate an electrical performance of the fabricated transistor.
No takes yet. Share an insight, caveat, or question.
Jeong et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: