Answers are grounded in this paper and cite their sources.
Efficient production of high-quality carbon nanotubes (CNT) with unique properties together with high hydrogen yield is a challenge for methane pyrolysis. In this study, targeted microwave heating and commercial Ni (65wt%) supported Al 2 O 3 -SiO 2 catalysis mixed with SiC (1:10) is employed to produce hydrogen and multi-walled CNT (MWCNT) using methane pyrolysis. Different low operating temperatures (700-900°C) and a fixed methane/nitrogen ratio (1:1) are used to reduce the cost of CNTs production. Microwave heating results in fast heating up on nickel active sites mixed with SiC which prevents carbon deposition on the wall. The MWCNTs grown on the catalysts surface is evaluated in terms of purity and thermal stability using Raman spectroscopy and TGA/DTG analysis respectively. The methane pyrolysis reaction is conducted in a temperature ranges (700-900 °C), and the activation energy has been calculated by Arrhenius equation to 17.7 kJ/mol (68.4 to 97.0 CH 4 conv%). The SEM analysis shows random CNTs growth and due to nickel nanoparticles agglomeration at higher temperatures, the CNTs average diameters increases from 54 nm at 700 °C to 69 nm at 900 °C. The I D /I G ratio between 700 °C to 900 °C decreases from 0.86 to 0.53 which might occur by the oxidation of amorphous carbon at higher temperatures. The lower value of I D /I G at 900 °C can be explained by more formation of graphitized carbon and sp 2 ordered structures at higher temperatures. Additionally, the XPS analysis shows a sharp peak of nickel metal (Ni 0 ) in the Ni2p spectra of the used catalyst at 700 °C which guarantees high activity. The average diameter and length of synthesized CNTs at 700 °C are measured to be 54 nm and 0.8 μm, respectively, which leads to a unique aspect ratio (L/D) of 15. The average diameter and length of synthesized CNTs at 900 °C are measured to be 69 nm and 0.5 μm, respectively, which results in a unique aspect ratio of 7. The SEM on the used catalyst at 700 °C shows coil type of CNTs growth which is an ideal candidate for efficient electromagnetic absorbers and Li battery electrode. The tip-growth of CNTs on nickel catalyst is confirmed by SEM. Moreover, Ni 3 C peaks in XRD spectra at 700 and 750 °C show activity of nickel carbide in the methane pyrolysis reaction at lower temperatures. On the other hand, TGA analysis confirms the maximum carbon yield at 900 °C (12.19 gC/100 gCatalyst). The acid treatment increases the carbon yield to 75% at 750 °C. Finally, the kinetic study on the nickel catalyst used for microwave heating methane pyrolysis was carried out using the Arrhenius equation. The activation energy (17.7 kJ/mol) comparison with other related studies shows the efficiency of the nickel-based catalyst under microwave heating. The synthesized CNTs by microwave heating methane pyrolysis achieve high yield, coil type growth, and less defect carbon.
No takes yet. Share an insight, caveat, or question.
Yahyazadeh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: