Answers are grounded in this paper and cite their sources.
Fe-based metallic glasses readily passivate in chloride-rich environments. However, the combined influence of boron and carbon on passive-film properties remains insufficiently understood. In this work, two melt-spun Fe–Cr–Nb–Mo–B–C glassy alloys with different B+C contents, Fe 68.14 Cr 8.83 Nb 4.37 Mo 4.37 B 4.28 C 10 (14BC) and Fe 59.63 Cr 7.73 Nb 3.83 Mo 3.83 B 7.5 C 17.5 (25BC), were investigated in chloride-containing solution. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed predominantly glassy matrices containing dispersed NbC crystals. Differential scanning calorimetry (DSC) revealed that the 25BC alloy exhibited a clear glass transition ( T g ≈ 498 °C) and a supercooled liquid region, ΔT x , of ∼30 °C. Electrochemical tests in 0.6 M NaCl electrolyte demonstrated corrosion current densities on the order of 10 −8 A·cm −2 , passive regions exceeding 1000 mV, and no pitting occurrence within the investigated potential range. Electrochemical impedance spectroscopy combined with complex-capacitance (Cole–Cole) analysis and power-law modeling revealed the formation of protective passive films characterized by capacitance values <10 μF·cm −2 . Despite forming a slightly thinner oxide film (5.0 vs 6.6 nm), the alloy with higher B+C content exhibited a higher interfacial resistivity (24 vs 3 × 10 6 Ω cm), indicating a more compact and protective passive layer. These findings demonstrate that increasing the B+C content enhances passivation by promoting the formation of a thinner but significantly more resistive passive film, establishing a direct mechanistic relationship between metalloid content, glass-forming ability, and passive-film transport properties.
No takes yet. Share an insight, caveat, or question.
COSTA et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: