Answers are grounded in this paper and cite their sources.
Modular uninterruptible power supply (UPS) systems and islanded microgrids require reliable plug-and-play (hot-swap) capability to ensure uninterrupted operation in critical applications, such as data centers and telecommunication infrastructures. Conventional presynchronization methods based on second-order generalized integrators effectively align the fundamental voltage components but inherently reject harmonic distortion caused by nonlinear loads. As a result, a voltage mismatch between the incoming inverter and the distorted point of common coupling (PCC) may occur, leading to transient inrush currents during connection, potentially triggering protection mechanisms and compromising system reliability. This article proposes a practical and software-only control strategy for hot-swap operation under nonlinear loading conditions. The method is based on a state-dependent harmonic presynchronization mechanism that temporarily injects the PCC harmonic content into the inverter voltage reference during the synchronization stage. By forcing the incoming inverter to replicate the distorted grid waveform prior to connection, the proposed approach minimizes the instantaneous voltage gradient across the contactor. Immediately after connection, the harmonic injection is disabled, restoring standard harmonic rejection and steady-state power quality. The proposed strategy requires no additional hardware or sensors and can be implemented in existing digital control platforms. Controller-hardware-in-the-loop results at four operating points demonstrate reductions of 42.4%–60.1% in the connecting-inverter current peak. These results confirm the effectiveness and practical applicability of the method for improving hot-swap reliability in modular UPS systems and other critical power applications.
No takes yet. Share an insight, caveat, or question.
Putzke et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: