Answers are grounded in this paper and cite their sources.
The treatment of the sludge digester effluent taken from a full-scale municipal wastewater treatment plant (WWTP), in Istanbul, Turkey using a pilot-scale partial nitritation (PN)/anammox (A) reactor was examined and maximum nitrogen removal rate (NRR) of 0.65 kg N/m 3 /d was achieved in this study. The PN, which was carried out in a continuously stirred tank reactor, successfully converted 56.4±4.8% of NH 4 + -N to NO 2 – -N. The effluent NO 3 – -N concentration kept below 1 mg/L with 0.4–0.8 mg/L of dissolved oxygen (DO) and pH of 7.2±0.1 at 25±3.3°C. Partially nitrified sludge digester effluent was further treated in a continuously stirred tank (CSTAn) anammox reactor, where high ammonium removal efficiency (ARE) achieved with a NO 2 – -N:NH 4 + -N and NO 3 – -N:NH 4 + -N ratios of 1.28±0.06:1 and 0.29±0.07:1, respectively. The results show that ARE up to 94±0.05% and total nitrogen removal of 75.6±12.6% were achieved. This study also illustrated that in CSTAn reactor, better NRR achieved when pH and DO were 7.72±0.04; 0.02±0.02 mg/L, respectively. However, the NRR was tending to rise below 10 mg/L of NO 2 – -N. The biomass concentration in the CSTAn reactor was 1075±330 g VSS/L with the SAA 0.38±0.06 kgN/kgVSS/d in the whole study. The anammox activity increased exponentially and correlated with the observed growth in volatile suspended solids.
No takes yet. Share an insight, caveat, or question.
Erdem et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: