Answers are grounded in this paper and cite their sources.
Using the hydrothermal crystallization method, a highly crystalline series of H-ZSM-5 zeolites were prepared in different Si/Al molar ratios (ranging from 25 up to 250). The performance of prepared catalysts was a subject of assessment in the process of methanol dehydration to dimethyl ether (DME), where a stainless steel fixed-bed flow reactor at 573 K and 16 barg with WHSV of 26.5 h −1 was used. The catalysts were characterized by BET, XRD, NH 3 -TPD, ICP, TGA/DTA, TPH, and SEM techniques. According to the experimental results, the catalytic activity and surface acidity were increased with an increase in the Si/Al molar ratio up to 125 and then decreased. The sample with a Si/Al molar ratio of 125 [H-ZSM-5(125)] exhibited the best conversion and highest activity in methanol dehydration to DME. Before a comprehensive study was made on the synthesized zeolite catalysts, the dehydration reaction with crude methanol was studied over a commercial H-ZSM-5 catalyst under identical conditions. Results show that prepared catalysts have a better performance than commercial ones.
No takes yet. Share an insight, caveat, or question.
Hassanpour et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: