Answers are grounded in this paper and cite their sources.
Statement of the problem: There is still a lack of data regarding the effects of exposure to different chemical disinfectants on the color stability, light translucency, and surface roughness of dentures is limited. Objective: This study aims to investigate the impact of six different chemical disinfectants on the color change, translucency, and surface roughness properties of heat-polymerized denture base acrylic resin. Material & Methods: Totally 70 rectangular blocks (10×10×2 mm) were polymerized from the heat-polymerized acrylic denture base resin material. The surfaces of the specimens polished with 600- and 1200-grit waterproof abrasive paper. Each specimen were immersed in six denture cleansers. The total immersion time of a specimen in selected chemical disinfectant was 36 hours. Color changes, translucency and, surface roughness were measured after immersion process. The results were statistically analyzed with 1-way ANOVA and the Tukey honestly significant difference (HSD) test (α=.05). Results: According to the results of the 1-way ANOVA test, significant differences were observed in the ∆E00, TP00 and Ra properties among the acrylic resin groups following immersion in chemical disinfectants (P<0.05). ΔE00 value of the CG group was significantly higher than that of the NS, SH, G, and E groups (P<0.05). The TP00 values of the NS and G groups were demonstrated significant differences compared with C group (P<0.05). The Ra values of the SH, SP, G, CG and, E groups were significantly increased after immersion process, in comparison with C and NS groups (P<0.05). Conclusions: Color stability, translucency and surface roughness of the denture base heat polymerized acrylic resin is influenced by chemical disinfectants.
No takes yet. Share an insight, caveat, or question.
Baysal et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: