Answers are grounded in this paper and cite their sources.
Optimizing the negative-to-positive capacity ratio (N/P) is essential for balancing energy density, rate capability, and interfacial stability in lithium-ion pouch cells. In this work, mixed Nickel-Manganese-Cobalt oxide (NMC) and Nickel-Cobalt-Aluminum oxide (NCA) / graphite-N 2 pouch cells were systematically investigated over an N/P range of 0.9–1.6 to determine the most favorable N/P ratio for high-rate applications. The cells were evaluated through calibrated 1C capacity measurement, rate capability testing from 0.5C to 12C, internal resistance analysis at different depths of discharge, self-discharge assessment, 100-cycle stability testing at 1C, polarization and power characterization, electrochemical impedance spectroscopy (EIS), and post-cycling SEM analysis. The results revealed a strong dependence of electrochemical behavior on N/P ratio. At 1C, the discharge capacity increased from 131.78 mAh g −1 for N/ P = 0.9 to 182.00 mAh g −1 for N/ P = 1.5, indicating improved cathode utilization with increasing anode excess. Under high-rate conditions, N/ P = 1.3 delivered the best overall performance, retaining 123.82 mAh g −1 at 12C with a 12C/1C retention ratio of 0.78. This composition also exhibited the minimum polarization-derived internal resistance (398.6 mΩ g), the highest peak power density (8327 mW g −1 ), and the lowest charge-transfer resistance (R ct = 1.38 Ω). In contrast, N/ P = 1.4 provided the best cycling stability, achieving 97.48% capacity retention after 100 cycles at 1C. Self-discharge behavior showed a U-shaped dependence on N/P ratio, with the lowest rates at N/ P = 1.2–1.3. SEM analysis confirmed that performance degradation was governed primarily by anode-side interfacial deterioration at low N/P and parasitic surface growth at high N/P. Overall, the findings demonstrate that N/P tuning is a decisive design parameter for high-rate NMC-NCA/graphite pouch cells, with N/P ≈ 1.3–1.4 offering the best balance between power capability, stability, and interfacial robustness.
No takes yet. Share an insight, caveat, or question.
Yazdanpanah et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: