Answers are grounded in this paper and cite their sources.
This paper presents the design, modelling, and experimental validation of a Hybrid Fin-Ray Finger (HFRF) integrating segmented inflatable Dragon Skin 30 silicone membrane pads for adaptive and bruise-free robotic apple harvesting. Harvesting fruits within cluttered canopy environments demands a balance between gentle contact to prevent bruising and sufficient pulling and detachment torque. However, conventional Fin-Ray fingers often exhibit limited torsional resistance, non-uniform force distribution, and reduced contact area, leading to slip and localized pressure concentrations on the fruit surface. To overcome these limitations, we integrate inflatable soft membrane pads into the Fin-Ray structure, increasing the effective finger width and improving surface conformity and pressure distribution. An analytical model is developed to predict membrane deformation and contact angle as a function of internal pressure, and the results are validated through finite element simulations and experimental testing. Pressure-sensitive film experiments demonstrate that Dragon Skin 30 inflation at 30 kPa increased contact area by up to 40% and reduced mean contact pressure by 11% relative to the unpressurised configuration, while EcoFlex 00–30 exhibited volumetric expansion under pressure that reduced conformal contact across the tested range. Performance evaluations were conducted under three standardized leaf interference conditions (0%, 50%, and 100% occlusion) using real Pink Lady apple leaves, with statistical analysis performed using one-way ANOVA and Tukey HSD post-hoc comparisons. At 30 kPa without leaf interference, normal detachment force increased by 148% relative to the no-pad configuration and torsional moment increased by 58% relative to the unpressurised condition, while maintaining performance above the detachment threshold. Under full leaf occlusion, torsional performance collapsed regardless of inflation pressure, identifying full canopy occlusion as the primary limiting factor for torsional resistance. These results confirm that the proposed HFRF provides pressure-adaptive, slip-resistant, and bruise-mitigating grasping performance suitable for robotic apple harvesting in unstructured orchard environments.
No takes yet. Share an insight, caveat, or question.
Yasar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: