Answers are grounded in this paper and cite their sources.
Chips generated during machining contain rich information on the machining history. Chip-level analysis has nevertheless remained underutilized for evaluating the machinability of additively manufactured materials. In this study, chip morphology and microstructure were analyzed to evaluate the machinability of directed energy deposition (DED) Ti-6Al-4V fabricated under various deposition conditions. The results showed that the deposition parameter, laser power, had a significant impact on changes in the deposited microstructure, influencing chip formation behavior, cutting force, and machined surface roughness. Under the low laser power condition of 200 W, severe chip segmentation and discontinuous shear deformation promoted unstable material removal behavior, resulting in increased cutting force and deteriorated surface quality. Under the high laser power condition of 440 W, the developed basketweave structure and highly intersecting lamellar morphology increased deformation complexity during machining and chip formation, leading to increased cutting force. In contrast, the intermediate laser power condition of 320 W promoted more distributed deformation behavior through the partial development of an intersecting lamellar structure, resulting in relatively stable chip formation behavior with reduced chip segmentation tendency, lower cutting force, and improved surface finish. These findings demonstrate that chip-based analysis provides a physically interpretable framework linking chip deformation behavior with the machinability of DED Ti-6Al-4 V.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: