Key result
Optical mapping enables direct visualization of surface action potentials co-registered with cardiac electrograms.
Why the study?
Optical mapping with voltage-sensitive dyes is an important tool to investigate cardiac electrical excitation but requires demonstration in Langendorff-perfused rat hearts.
Optical mapping enables detailed ex vivo rat heart analysis; extends accessible protocols for arrhythmia research but leaves clinical translation open.
Optical mapping of the cardiac surface with voltage-sensitive fluorescent dyes has become an important tool to investigate electrical excitation in experimental models that range in scale from cell cultures to whole-organs([1, 2]). Using state-of-the-art optical imaging systems, generation and propagation of action potentials during normal cardiac rhythm or throughout initiation and maintenance of arrhythmias can be visualized almost instantly([1]). The latest commercially-available systems can provide information at exceedingly high spatiotemporal resolutions and were based on custom-built equipment initially developed to overcome the obstacles imposed by more conventional electrophysiological methods([1]). Advancements in high-resolution and high-speed complementary metal-oxide-semiconductor (CMOS) cameras and intensely-bright, light-emitting diodes (LEDs) as well as voltage-sensitive dyes, optics, and filters have begun to make electrical signal acquisition practical for cardiovascular cell biologists who are more accustomed to working with microscopes. Although the newest generation of CMOS cameras can acquire 10,000 frames per second on a 16,384 pixel array, depending on the type of sample preparation, long-established fluorescence acquisition technologies such as photodiode arrays, laser scanning systems, and cooled charged-coupled device (CCD) cameras still have some distinct advantages with respect to dynamic range, signal-to-noise ratio, and quantum efficiency([1, 3]). In the present study, Lewis rat hearts were perfused ex vivo with a crystalloid perfusate (Krebs-Henseleit solution) at 37 degrees C on a modified Langendorff apparatus. After a 20 minute stabilization period, the hearts were intermittently perfused with 11 mMol/L 2,3-butanedione monoxime to eliminate contraction-associated motion during image acquisition. For optical mapping, we loaded hearts with the fast-response potentiometric probe di-8-ANEPPS([4]) (5 microMol/L) and briefly illuminated the preparation with 475+/-15 nm excitation light. During a typical 2 second period of illumination, >605 nm light emitted from the cardiac preparation was imaged with a high-speed CMOS camera connected to a horizontal macroscope. For this demonstration, hearts were paced at 300 beats per minute with a coaxial electrode connected to an isolated electrical stimulation unit. Simultaneous bipolar electrographic recordings were acquired and analyzed along with the voltage signals using readily-available software. In this manner, action potentials on the surface of Langendorff-perfused rat hearts can be visualized and registered with electrographic signals.
No takes yet. Share an insight, caveat, or question.
Sill et al. (2009) studied this question. Optical mapping was evaluated on Visualization of action potentials. Action potentials on the surface of Langendorff-perfused rat hearts can be visualized and registered with electrographic signals using optical mapping.
Synapse has enriched 4 closely related papers on similar clinical questions. Consider them for comparative context: