Answers are grounded in this paper and cite their sources.
The anodic oxidation of 90 keV CO + ion-implanted Si substrates was investigated as a function of the ion dose ranging from 2.5 × 10 15 to 5 × 10 16 cm −2 after the annealing at the temperature of 1100 °C. SRIM software calculations, spectral ellipsometry, Fourier transform infrared spectroscopy, high-resolution electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectrometry and atomic force microscopy were employed to study the structural and optical properties of the oxidized layers. In the samples implanted with an ion dose higher than 1 × 10 16 cm −2 , the formation of SiC nanocrystals was observed at a depth of the projected CO + ion range. After the anodic oxidation, the pore formation in the anodic oxide layers was observed. The pore localization correlated with the SiC nanocrystal distribution. The anodic SiO 2 layer porosity increased as a function of thickness and reached its maximal value of 60-65 vol% at a thickness exceeding ∼250 nm. The refractive index and the dielectric permittivity of the porous SiO 2 films were extracted from the ellipsometry spectra using the Bruggemann effective medium approximation. Both the refractive index and the dielectric permittivity of the porous SiO 2 films decreased as the pre-implanted CO + ion dose grew. In the spectral range of 1-5 eV, the dielectric permittivity of the porous SiO 2 layer was 0.4-0.6 lower than in the thermally grown SiO 2 layer. The results obtained are discussed within the differences in the anodic oxidation of the silicon matrix and regions containing SiC nanocrystals.
No takes yet. Share an insight, caveat, or question.
Tyschenko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: