Answers are grounded in this paper and cite their sources.
Purpose: to evaluate the effect of repeated heat pressing and thermocycling on micro-shear bond strength of PEEK to resin cement. Methods: A total of 30 PEEK specimens 10 mm x 10 mm x 2 mm were prepared and divided to three groups (n=10). Group I was pressed using new PEEK, Group II ; 50% new PEEK and 50% reprocessed PEEK, and Group III ; 100% reprocessed PEEK. Bonding surfaces were sandblasted and thin layer of bonding agent was applied and polymerized. Plastic tygon tubes with an inner diameter of 1 mm and a height of 1.5 mm were fixed on the sample and filled with dual polymerized self etch self adhesive resin cement and cured. Half the specimens in each group (n=5) underwent 5000 thermocycles (5‐55°C) before shear bond strength (µSBS) test. Two-way Analysis of Variance (ANOVA) studied the effect of PEEK condition, thermocycling and their interaction on mean micro-shear bond strength µSBS. Bonferroni’s post-hoc test was used for pair-wise comparisons when ANOVA test is significant. Results: The PEEK condition (regardless of thermocycling) had a statistically significant effect on mean µSBS (P-value = 0.001, Effect size = 0.455). Thermocycling (regardless of PEEK condition) also had a statistically significant effect on mean µSBS (P-value = 0.002, Effect size = 0.331). The interaction between two variables had no statistically significant effect on mean µSBS (P-value = 0.442, Effect size = 0.066). Conclusion: Both repeated heat pressing and thermocycling had a negative effect on micro-shear bond strength of resin cement to PEEK
No takes yet. Share an insight, caveat, or question.
Arafa et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: