Answers are grounded in this paper and cite their sources.
The use of Savonius rotors in prosumer markets and urban applications is driving the utilisation of smaller rotor diameters. This results in much higher rotational speeds at the same wind velocity. Consequently, noise effects and turbulence intensity have become important research objectives, alongside torque and power characteristics. This study presents an extensive wind tunnel test campaign investigating the operation of Savonius rotors over a wind velocity range from 4 to 20 m/s. An increase in the effective wind velocity due to the wind turbine blockage is observed. The characteristics of the torque behaviour at high Tip Speed Ratio (TSR) are discussed on experimental and numerical grounds. The measured rotor characteristics coincide well with the typical Savonius up to TSR = 1.2. Above this value, the measured power becomes lower than in free wind conditions, indicating a possible additional correction for wind tunnel testing. Due to high rotational speeds, an important objective was to detect the noise and flow unsteadiness generated by the rotor. The relationship between noise level, wind speed, and generated power demonstrates that noise decreases when the rotor is loaded. When the rotor produces the maximum power, the noise is at the lowest level.
No takes yet. Share an insight, caveat, or question.
Doerffer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: