Answers are grounded in this paper and cite their sources.
Water electrolysis is the leading route to green hydrogen, but its separator is never perfect: hydrogen crosses into the oxygen stream and oxygen into the hydrogen stream. A hydrogen–oxygen mixture is flammable above about 4 vol% hydrogen, so cross-over must be monitored continuously; plants shut down at 2 vol%. Its sensors were mostly developed for hydrogen leaks in air, and no review has examined how they perform inside an electrolyser; this review closes that gap. It derives six requirements for a cross-over sensor, assesses seven hydrogen-sensing families and relevant oxygen-sensing principles against them, and finds the market dominated by air-referenced leak detectors, not process analyzers. In a 103-day field study (8,041,007 one-hertz samples), an in-house electrochemical sensor and a commercial analyzer sampling the same gas disagreed by a persistent 1.3–1.5 vol%; only the in-house channel held a stable zero while the plant was idle. A long-term-stability qualification protocol is proposed.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: